A-A+

NanoBoot 5.0 (x64 & x86) 更新至 5.0.2.3

2014年05月17日 NanoBoot 评论 25 条 阅读 5,464 views 次

v5.0.2.3
[x64 & x86]
1、修复LSI SAS控制器不能正常工作的问题(感谢@Diverge的测试)
2、增加旧的Realtek r8169网卡驱动,添加下面的内核启动参数来使用:
     rmmod=r8168,r8169_new insmod=r8169
3、增加ACPI, IPMI相关驱动
     Kernel CONFIG_ACPI_IPMI enabled
     Kernel CONFIG_IPMI_SI enabled
     Kernel CONFIG_IPMI_WATCHDOG enabled
     Kernel CONFIG_IPMI_HANDLER enabled
     Kernel CONFIG_IPMI_POWEROFF enabled
     Kernel CONFIG_IPMI_PANIC_EVENT enabled
     Kernel CONFIG_IPMI_PANIC_STRING enabled
     Kernel CONFIG_IPMI_DEVICE_INTERFACE enabled
4、增加ARECA (ARC11xx/12xx/16xx/1880) SATA/SAS RAID相关控制器驱动
5、增加Promise SuperTrak EX Series相关控制器驱动

标签:

25 条留言  访客:17 条  博主:8 条

  1. carl

    老大,x86的关机重启问题还没有修复啊。

  2. 枫叶

    找不到下载的地方呀???

  3. Shurin

    Shutdown with power button not working :(

    If /proc/acpi/event is not present then the kernel has no acpi support enabled. I think the kernel needs to be recompiled with:
    CONFIG_ACPI=y

  4. 西瓜

    希望能加入tp-wn821n无线网卡驱动。

  5. Rob van Tol

    I am running XPEnology on Proxmox KVM with my NIC and storage controller passed through to the VM. The bootloader is great. It’s fast and running really well so far.

    The problem i have is that my NIC is not supported.
    Please add Atheros AR8151 Network drivers.

  6. yuko

    能不能加功能可以加载外置驱动的?
    就是把驱动放在你的包外,在参数中添加路径就可以加载,方便自行添加驱动。

  7. admaxc

    您好!能否把 Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet的网卡驱动放到您的引导你, 我的机器是Dell r710服务器(BCM5709网卡),我在网上找了好多资料多说kernel /zImage rmmod=bnx2_new 就可以啦 可后面网卡信息总是显示 not up,现在就网卡驱动不了其他没问题,十分感谢你能帮我解决找个问题 ,谢谢

  8. aaa

    谢谢分享!

  9. p.m

    Great job, Sancome!
    In future versions Nanoboot would like to have drivers for the following devices:
    1. Adaptec/PMC-Sierra 6&7 Series SAS/SATA HBA (CONFIG_SCSI_PM8001)
    2. Marvell 88SE64XX/88SE94XX SAS/SATA HBA (CONFIG_SCSI_MVSAS)
    3. Qualcomm Atheros AR816x/AR817x NICs (CONFIG_ALX)

    Success in your work!

    • sancome

      You are so carefully, i can find that easily, but there is no CONFIG_ALX, maybe the kernel is different.

  10. Square

    感謝您的分享,如果可以請將 ATHEROS L1E 加入支援。謝謝!!

    • sancome

      没问题,下个版本见。

  11. Shurin

    Shutdown with power button not working : (
    If / proc / acpi / event is not present then the kernel has no acpi event support enabled I think the kernel needs to be recompiled with.:
    CONFIG_ACPI_EVENT=y

    • sancome

      The module is CONFIG_ACPI_PROC_EVENT, i will add it in the next release.

  12. mizuki

    8169sc好像不行

    • sancome

      试试增加内核启动参数rmmod=r8168,r8169_new insmod=r8169,如果还不行,就把这三个模块调换,反复测试一下。

  13. w19119

    老大,麻烦解决一下x86的关机变重启的问题吧!

    • sancome

      下一个版本将会修复

  14. alban

    感謝分享,來學習一下..

  15. cljgood

    老大,请问群联主控的U盘支持不,应该用什么vid和pid啊?

    • sancome

      自己用ChipGenius之类的工具查看vid和pid

  16. yygyyve

    老大。。我的ARECA ARC-1222还是不能识别。。。

    • sancome

      把dmesg结果发到我邮箱sancome[AT]nanoboot.tk

  17. Analyser

    您好,SCSI 挂载的数据盘似乎不能使用?

    • sancome

      发邮件给我,说的详细一点。

给我留言

Translate »